During Use - Elba EGH-K8942G Owner's Manual

ATTENTION: If the flame does not light after a few attempts, check that the
burner cap and burner base are correctly positioned.
Burner ring is
not positioned properly
CAUTION: Always ensure the burner cap is placed in its original position
correctly as shown to avoid any incident and damage its original shape.
The manufacture denies all claim arise from the burner due to improper
placement of the burner ring.

DURING USE

This product is designed to cook food for household and for non-professional
purposes. It should not be used for any other purpose.
After using the appliance, make sure that all controls are in "OFF" position.
-
- If you use an electrical socket close to this appliance, make sure that the
cables of the appliances you are using are distance away from the cooking
zones of this appliance.
RISK OF DEFLAGRATION
In the event of the burner flames being accidently extinguished, turn off the
burner control knob and open a window or the door to the room. Do not
attempt to re-ignite the burner for at least 1 minute.
The use of a gas cooking appliance results in the production of heat, moisture
and products of combustion in the room in which it is installed. Ensure that the
kitchen is well ventilated especially when the appliance is in use: keep natural
Turn the ignition knob clockwise up to the OFF position
without pressing it. The gas will stop supply to the burner
and the burner will be switched off.
Remarks: Always make sure the ignition knob is at OFF
position when not in use.
Burner ring is
upside down
Burner ring is
placed correctly