Elba EGH-K8942G Owner's Manual page 5

OPERATING INSTRUCTIONS
Before using the appliance, make sure the ignition knob is in the "OFF"
position and turn on the main cock. After using, ensure to turn off the ignition
knob and main cock.
TURN ON THE APPLIANCE
CONTROLLING THE FLAME
Press and turn the ignition knob counter clockwise for 3 to
5 seconds to higher flame position slowly. Make sure that
the burner has lit.
When you start to use the unit for the first time or the unit
has not been used for a long period of time, it sometimes
happens that the burner is not ignited easily. This is
because the gas needs to fill up the rubber hose before
reaching to the burners. After lighting the flame, keep the
knob pressed for about 10 seconds. This is necessary to
heat up the thermocouple and activate the safety valve (if
any), which would otherwise cut off the gas flow.
Control the knob between max and min to regulate the
flame. Turn the knob counter clockwise to the minimum
position to set the lowest cooking output level.
Remarks: When the flame is reduced suddenly it may
happen to turn off the burner. Always make sure the
burner is ignited when the power is in minimum level.