Table of Contents
Advertisement
Industrial Electronic Devices
NEW CONFIGURATION / OPEN CONFIGURATION:
The
"New
Configuration" button creates the folder which contains the entire device's configuration.
A device's configuration can also be imported or exported:
To clone the configurations of a programmable "EtherNet/IP Master / Serial -
Converter" in order to configure another device in the same manner, it is necessary to
maintain the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the
button
"Open
Configuration".
ADFweb.com S.r.l.
User Manual EtherNet/IP Master/ Serial
Document code: MN67667_ENG
Revision 1.000
Page 17 of 30
Advertisement
Table of Contents
