Table of Contents
Advertisement
Industrial Electronic Devices
Reading data by EtherNet/IP module: this command allows to read a specific module from a specific EtherNet/IP slave.
Request:
Response:
(*) The number of EtherNet/IP slave depends on the order with which they are defined in the "EtherNet/IP Access" section of SW67667.
ADFweb.com S.r.l.
Byte Number
Description
1
'R' (0x52)
2
'.' (0x2E)
3÷5
EtherNet/IP slave to read (000÷009) (decimal) (*)
6
'.' (0x2E)
7÷9
EtherNet/IP module to read (decimal) (**)
Byte Number
Description
1
'D' (0x44)
2
':' (0x3A)
3÷n+2
Output byte of EtherNet/IP slave (two chars for each
byte)
*n=number of Output bytes of the selected module
User Manual EtherNet/IP Master/ Serial
Document code: MN67667_ENG
Revision 1.000
Page 25 of 30
Advertisement
Table of Contents
