Table of Contents
Advertisement
If you are using a communication port other than Com2, then you will need to amend this command
accordingly. It is now possible to download data directly into any appropriate software.
7.3 Configuration of Printer
Your gauge is also capable of printing directly to a serial printer, such as that available from Elcometer.
Please note that your printer must have line feeds enabled with carriage returns, otherwise all data will be
printed in the same place and be illegible (see printer handbook). If the OUTPUT function is engaged, all
data stored in memory will be printed. Alternatively, it is possible to print measurements as they are taken.
8 USING NOVO-SOFT SOFTWARE
8.1 Installing the program
Close all running applications in your PC before installing Novo-Soft software. Insert the supplied CD-ROM
in your CD-ROM drive. If the installation wizard does not start automatically, search for and then run the
ElcometerNovoSoftInstall.EXE file on the supplied CD-ROM and follow the installation instructions.
8.2 Interfacing to your PC
Connect the jack plug end of the RS232 interface cable to the RS232 interface on your gauge and the 9 pin
connector on the other end of the cable to a spare Com port at the rear of your PC.
8.3 Running the program
If you accepted the default directory, the program will be installed in:
22
Advertisement
Table of Contents
