About Your Gauge - Elcometer Elcomotor 312 Operating Instructions Manual

R
Thank you for your purchase of this Elcometer 312 Elcomotor™ Coating Thickness Gauge. Welcome to
Elcometer.
Elcometer are world leaders in the design, manufacture and supply of inspection equipment for coatings
and concrete. Our products cover all aspects of coating inspection, from development through application
to post application inspection.
The Elcometer 312 Elcomotor™ Coating Thickness Gauge is a world beating product. With the purchase
of this gauge you now have access to the worldwide service and support network of Elcometer. For more
information visit our websites:
www.elcometer.com
www.elcomotor.com

1 ABOUT YOUR GAUGE

The Elcometer 312 Elcomotor™ Coating Thickness Gauge is a handheld coating thickness gauge for
checking dry film thickness of paint coatings on automotive bodywork.
The gauge is available either with a built-in integral probe or with a separate probe. Two types of probe are
available:
• Elcometer 312F for measurement on steel bodies
• Elcometer 312FNF for measurement on steel and aluminium bodies
The gauge can be switched to display metric (µm) or imperial (mils) units of measurement.
Your gauge was calibrated at the factory, however you can adjust the calibration using the foil set supplied
with the gauge.
The Elcometer 312 Elcomotor™ is powered by internal dry cell batteries.
2