Table of Contents
Advertisement
2.2 CHARGING THE BATTERY
Plugging the charger into the socket marked DC on the side of the instrument allows the battery to be
charged. The battery will be fully charged in approximately 16 hours from full discharge.
Ensure that the low battery symbol is showing on the display before recharging; this will maximise the life
of the battery.
2.3 THE CONTROL PANEL
The layout of the control panel of your gauge will vary according to which model you have.
Figure 2 shows the front panel for a single or dual angle Glossmeter, which is controlled by six buttons.
Figure 3 shows the control panel for a triple-angle Glossmeter, which is controlled by nine buttons.
Figure 2. Control panel of single and dual angle Glossmeters
Delete
Reset
Stats
2nd
On
Statistical Glossmeter
Cal
Set cal
Cal
Output
Read
Angle
7
Advertisement
Table of Contents
