1.0
OVERVIEW
This board interface is used for the connection between C82, C76, M16D,
and TSM23S Closed Loop Stepper.
2.0
FEATURES
•
CONN 28 POS connector for Connection of Driver.
•
RJ45 Connector for Axis.
•
Encoder Output.
•
Select Jumper for Hard Enable or Soft Enable.
•
Select Jumper alarm active Low or active High
•
Select jumper for signal differentials.
•
Terminals for external drive enable push button.
User's Manual
C35S
y
C62
Page 1