Heater Convection - Samsung NX58K9850S Series Service Manual

3. Disassembly and Reassembly

3-34 HEATER CONVECTION

WARNING
Disconnect power before servicing the range . Replace all panels before operating range . Failure to do so
can result in death or electrical shock .
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off gas supply to the range before servicing. Check all gas lines and fittings for leaks before operating
the range . Replace all panels before operating range . Failure to do so can result in death or personal injury
from explosion, fire, or asphyxiation.
CAUTION
When you work on the gas range, be careful when handling sheet metal parts . Sharp edges may be present,
and you can cut yourself if you are not careful .
Parts
1 . 1 . Follow the step 3-1 .
2 . To remove convection heater, disconnect
wires or connector going to
the heater-convection
HEATER 3 . Remove 2 screws supporting the
CONVECTION convection heater at the rear of the oven
of the oven .
4 . Pull out the convection heater .
5 . Reverse the order to install the heater
convection .
This document can not be used without Samsung's authorization.
Explanation
65
Explanation Photo
Connector of the Heater Convection
Bracket Convection Heater
3
4