Spark Module, Knob Led - Samsung NX58K9850S Series Service Manual

3. Disassembly and Reassembly

3-8 SPARK MODULE, KNOB LED

WARNING
Disconnect power before servicing the range . Replace all panels before operating range . Failure to do so
can result in death or electrical shock .
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off gas supply to the range before servicing. Check all gas lines and fittings for leaks before operating
the range . Replace all panels before operating range . Failure to do so can result in death or personal injury
from explosion, fire, or asphyxiation.
CAUTION
When you work on the gas range, be careful when handling sheet metal parts . Sharp edges may be present,
and you can cut yourself if you are not careful .
Parts
1 . Follow the step 3-1 .
2 . Disconnect 7 wire connectors
SPARK
from the Spark Module .
MODULE
3 . Remove 2 screws from the
Spark Module and replace it
1 . Follow the step 3-3 .
2 . Disconnect wire connector from
KNOB LED the Knob led .
3 . Remove 2 screws from the Knob
led and Pull out it
This document can not be used without Samsung's authorization.
Explanation Explanation Photo
3
2
The wire have to pass only this hole .
25
3
3 3