Gasket-Door - Samsung NX58K9850S Series Service Manual

3. Disassembly and Reassembly

3-21 GASKET-DOOR

Parts
1 . Open the oven door to its fully
down position .
2 . Pull the ends of the gasket out
of the liner holes .
3 . Pull the oven door gasket clips
out of the holes until all of the
clips are removed .
4 . When the service is complete,
Insert gasket clips in each
mounting hole . Push the ends
GASKET
of gasket in end holes in the
DOOR
bottom of the front oven frame .
5 . Close the oven door .
When you install the new
gasket, make sure that all of
the clips are seated in their liner
holes, and that the ends of the
gasket are pushed fully into
their holes . Use the pointed end
of a pencil to push the gasket
ends into the holes .
This document can not be used without Samsung's authorization.
Explanation Explanation Photo
46