Pcb Assembly - Samsung NX58K9850S Series Service Manual

3. Disassembly and Reassembly

3-6 PCB ASSEMBLY

WARNING
Disconnect power before servicing the range . Replace all panels before operating range . Failure to do so
can result in death or electrical shock .
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off gas supply to the range before servicing. Check all gas lines and fittings for leaks before operating
the range . Replace all panels before operating range . Failure to do so can result in death or personal injury
from explosion, fire, or asphyxiation.
CAUTION
When you work on the gas range, be careful when handling sheet metal parts . Sharp edges may be present,
and you can cut yourself if you are not careful .
Parts
1 . Follow the step 3-1 .
2 . Disconnect 14 wire connectors
MAIN PCB
from the Main PCB .
ASSEMBLY
3 . Remove 2 screws of PCB
assembly and replace the PCB
1 . Follow the step 3-1 .
2 . Disconnect 3 wire connectors
SUB PCB
from the Main PCB
ASSEMBLY
3 . Remove 2 screws of PCB
assembly and replace the PCB
This document can not be used without Samsung's authorization.
Explanation
22
Explanation Photo
3
Main PCB
3
Sub PCB
3