Assy Control Box - Samsung NX58K9850S Series Service Manual

3. Disassembly and Reassembly

3-2 ASSY CONTROL BOX

WARNING
Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so
can result in death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
Shut off gas supply to the range before servicing. Check all gas lines and fittings for leaks before operating
the range . Replace all panels before operating range . Failure to do so can result in death or personal injury
from explosion, fire, or asphyxiation.
CAUTION
When you work on the gas range, be careful when handling sheet metal parts . Sharp edges may be present,
and you can cut yourself if you are not careful .
Explanation Photo
This document can not be used without Samsung's authorization.
2
2
2
3
3
3
Assy Wire Main
Disconnect (This
1 . Remove 6 Knobs from the Assy Control
Box .
2 . Remove 1 screw from the each 5 Holder
3
Knobs except for Holder Knob Lamp . (Total
5 pcs)
3 . Open the Door and Remove 4 screws from
the bottom of Assy Control Box .
4 . Lift the Assy Control Box slightly to
separate from the range . (Assy Wire Main
is still connected to the Assy Display of
Assy Control Box)
5 . Disconnect 6 wire connectors from the
Assy Display PCB .
6 . Remove the Assy Control Box from the
range .
17
Explanation