Samsung NX58K9850S Series Service Manual page 58

3. Disassembly and Reassembly
BURNER BROIL
Parts
4 . Remove 1 screw of bracket HSI-
wire and separate the bracket
HIS-wire .
5 . Remove 4 screws of bracket-
broil spreader to top of oven .
6 . Support the burner-broil with
one hand, remove 2 screw
supporting the burner-broil to
the front and the rear of the
BURNER
oven .
BROIL
7 . Pull the upper ASSY-BURNER
BROIL SPREADER to disconnect
it from the holder nozzle-broil
on the rear wall of the oven .
8 . Carefully remove ASSY-
BURNER BROIL SPREADER .
9 . Separate the burner broil and
bracket-broil spreader .
This document can not be used without Samsung's authorization.
Explanation Explanation Photo
BRACKET
HSI-WIRE
BRACKET
BROIL-SPREADER
58
BURNER BROIL