Samsung NX58K9850S Series Service Manual page 34

3. Disassembly and Reassembly
3-13 VALVE COOKTOP
Parts
1 . Follow the steps 3-2 and 3-3 .
2 . Open or remove a Door .
3 . Place a finger behind each side
of the switch ignition and pull it
straight out to release it from
the control shaft .
4 . Using a tubing wrench and a
channel lock wrench, disconnect
the gas lines from the valve
cooktop . Do not bend or crimp
VALVE
gas lines during Removal .
COOKTOP
5 . Remove the Valve Cooktop
followed by removal of 1 screw
on the valve cooktop .
6 . Replace the Valve Cooktop and
Check gas leakage .
When assembling or
disassembling the valve, the
screw torque should be adjusted
to 1 .5N .m .
This document can not be used without Samsung's authorization.
Explanation Explanation Photo
Switch Ignition
Adaptor
34
5
5