3. Disassembly and Reassembly
3-10 ELECTRODE
Parts
1 .
Follow the steps on 3-1 and 3-3 .
2 .
Disconnect the wire connectors
from the terminal on the Spark
module .
3 .
To remove the Electrode from
the cup, squeeze the two outside
ELECTRODE
edges of the clip under the
electrode together while pulling
to remove the locking clip . Slide
the electrode and the wire from
the cup . In case of Dual Burner,
Rotate Electrode and pull it up .
This document can not be used without Samsung's authorization.
Explanation
Bracket Spring
Explanation Photo
Gas Orifice
Burner Cup
Electrode
Electrode
Wire Housing
28
Tube
Holder & Spring ETC