Samsung NX58K9850S Series Service Manual page 101

4. Troubleshooting
Oven parts
Oven lamp not working
Oven lamp is
not working .
* Make sure the control lockout
feature is not turned on .
Ok
* Check for burned out bulb .
Ok
* Check the harness and connections
at connectors (CN601 &CN301)on
the PCB . light socket terminals, and
oven lamp and source control relays .
(RY608 & RY601)
Ok
* Measure the resistance
across the light ballast/socket
terminals.(Normal:∞Ω)
Ok
* Replace the PCB .
This document can not be used without Samsung's authorization.
No
No
No
No
END
101
* While holding the oven door open,
press and hold the lockout keypad
for three or more seconds .
* Remove oven lamp cover
and oven light bulb . If burned
out, replace with a 40W appliance
bulb .
* Reconnect securely or replace
damaged wire harness .
END
*Replace the oven light
ballast/socket .
END
Oven light socket
terminal
END
END