3-19 GASKET-DOOR
Parts
1. Open the oven door to its fully
down position.
2. Pull the ends of the gasket out
of the liner holes.
3. Pull the oven door gasket clips
out of the holes until all of the
clips are removed.
4. When the service is complete,
Insert gasket clips in each
mounting hole. Push the ends
GASKET
of gasket in end holes in the
DOOR
bottom of the front oven frame.
5. Close the oven door.
When you install the new
gasket, make sure that all of
the clips are seated in their liner
holes, and that the ends of the
gasket are pushed fully into
their holes. Use the pointed
end of a pencil to push the
gasket ends into the holes.
Explanation
Explanation Photo
43