Replacing The Gasket Door - Samsung NX58H5600SS/AA Service Manual

3. Disassembly and Reassembly

3-10 Replacing the Gasket Door

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range. Replace all panels before operating the range. Failure to do
so can result in death or electrical shock.
WARNING
EXPLOSION, FIRE, AND ASPHYXIATION HAZARD
operating the range. Replace all panels before operating the range. Failure to do so can result in death or
CAUTION
When you work on the gas range, be careful when handling sheet metal parts. Sharp edges may be
present, and you can cut yourself if you are not careful.
Parts
Gasket Door
1. Open the oven door to its fully
down position.
2. Pull the ends of the gasket out of
the liner holes.
3. Pull the oven door gasket clips out
of the holes until all of the clips are
removed.
4. When the service is complete,
Insert gasket clips in each
mounting hole. Push the ends of
gasket in end holes in the bottom
of the front oven frame.
5. Close the oven door.
REASSEMBLY NOTE :
When you install the new gasket,
make sure that all of the clips are
seated in their liner holes, and that
the ends of the gasket are pushed
fully into their holes.
Use the pointed end of a pencil
to push the gasket ends into the
holes.
22