Control Panel And Panel Platform/Holder Leds; Usb Connector - ABB ACS-AP-I User Manual

Control panel and panel platform/holder LEDs

￭
The ACS-AP-... control panel has a status LED. The control panel mounting platform or
holder has two status LEDs. For their indications, see the following table.
Location LED
Control panel Continuous green
Flickering green
Blinking green
Continuous red
Blinking red
Blinking blue (ACS-
AP-W only)
Flickering blue
(ACS-AP-W only)
Control panel Red
mounting platform or
Green
holder (with the
control panel
removed)

USB connector

￭
The USB connector is used for connecting the control panel to a PC. When connected, the
control panel acts as an USB adapter for data transfer between the PC tool and the drive.
It is also possible to transfer data between the PC and the control panel through the USB
connection.
See chapter Panel-to-PC USB connection (page
Indication
The unit is functioning normally.
Data is transferred between the PC and the unit through the USB
connection of the control panel.
There is an active warning in the unit.
There is an active fault in the unit.
There is a fault that requires the stopping and restarting of the
drive/converter/inverter.
The Bluetooth interface is enabled, in discoverable mode, and
ready for pairing.
Data is being transferred through the Bluetooth interface of the
control panel.
There is an active fault in the unit.
Power supply for the control unit is OK.
71).
Control panel overview 23