ABB ACS-AP-I User Manual page 64

64 Fault tracing
Display LED Type
continuous red
See
blinking red Faults of this type require stopping and restarting
the drive before it continues to function normally.
See
continuous red A fault has occurred in another drive in the panel
bus.
blinking green
See
continuous green The connection between the control panel and the
drive is faulty.
Check that the connection cable is properly at-
tached.
continuous green The control panel type is not compatible with the
drive you attempt to use it with.
See
continuous green The connection between the control panel and the
drive has been lost.
Check the control panel network connections.
Select another drive.
Faults (page 65).
Faults (page 65).
Warnings (page 65).
Applicability (page 10).