Primary Settings - ABB ACS-AP-I User Manual

Sub-menu Function
Date & time Set date and time, and select their display settings and whether the control panel auto-
matically adjusts the time for daylight savings changes. The time and date display setting
determines how time stamps are formatted.
Edit texts Customize editable user interface texts, such as the drive name.
Display settings Set backlight power save on/off and adjust display contrast and brightness.
Reset to defaults Reset settings to their default values.
Erase fault log: This functionality is available in a future release.
Reset Home view layout: Default Home view settings are restored.
Reset all parameters: This functionality is available in a future release.
Show in lists Show or hide the numeric IDs of:
• parameters and groups
• option list items
• bits
• devices in Options → Select drive.
Pass code Enter pass codes into this parameter to activate further access levels (for example addi-
tional parameters).

Primary settings

The Primary settings menu has the following sub-menus.
Note: The contents displayed may vary based on the drive/device to which the panel is
connected. The menu shown is only an example.
Sub-menu Function
Macro Set up drive control and reference source by selecting from a set of predefined wiring
configurations.
Drive Adjust drive related settings, such as control location, run permissions, ramps, limits,
constants speeds, flying starts references.
Functions in the main Menu 49