Faults And Warnings With Multiple Drives; Faults And Warnings In The Currently Selected Drive; Faults And Warnings In Other Drives - ABB ACS-AP-I User Manual

62 Control of multiple drives

Faults and warnings with multiple drives

Faults and warnings in the currently selected drive

￭
Faults and warnings in the currently selected drive are shown as normal.

Faults and warnings in other drives

￭
Faults in the other drives in the panel bus appear as remote faults.
Faults that require a restart look like any other remote faults. They are shown normally if
you switch to the drive in which the fault has occurred.
In the Fault view, the keys have the following functions:
•
Press (Hide), to go back to the previous view. The fault view does not reappear as
with regular faults.
•
Press (Switch,) to connect to the faulted drive.
Only active warnings in the selected drive are shown in the control panel. To view warnings
in another drive, you must select that drive in the Select drive menu.