38 Functions in the main Menu
•
Use
and
to move the cursor.
•
Press
(Save) to select and save the highlighted option.
•
To cancel and exit, press
Some selection list parameters allow you to choose another parameter as its value. In
addition to a preset list of options, you can select a parameter freely, represented by the
selection Other in the list.
To select a parameter, follow the instructions:
1.
Select Other to move to a list of parameter groups.
2.
Select a parameter group to move to a list of parameters.
3.
Depending on the parameter you are editing, you must select a parameter or an
individual bit, or you may choose either of the two.
•
If the right softkey label is Select, you must select an individual bit as the value of
the parameter you are editing. Press
•
If the right softkey label is Save, you can select that parameter as the value of the
parameter you are editing. Press
•
If the right softkey label is Save and there is also an arrow on the right hand side
of the selection, you can choose an individual bit or all the bits in that parameter.
(Cancel).
(Select) to move to a bit selection list.
(Save) to save the selection.