ABB ACS-AP-I User Manual page 51

Sub-menu Function
Start, stop, reference, Shows where the drive is currently taking its start, stop commands and reference. The
summary view is updated in real time. If the drive is not starting or stopping as expected, or runs
at undesired speed, use this view to find out where the control comes from.
Limit status Describes any limits currently affecting operation. If the drive is running at undesired
speed, use this view to find out if any limitations are active.
Active faults Shows the currently active faults and provides instructions on how to fix and reset.
Active warnings Shows the currently active warnings and provides instructions on how to fix and reset.
Active inhibits Shows the currently active inhibits. The drive cannot start. Drive is not parameterized
correctly.
Fault & event log Lists the faults, warnings and other events that have occurred in the drive.
Fieldbus Provides status information and sent and received data from fieldbus for troubleshooting.
Load profile Provides status information of load distribution (that is, drive running time spent on each
load level) and peak load levels.
Functions in the main Menu 51