Press
to move to a bit selection list. If you want to select all the bits in the
parameter, press
4.
Select a bit if applicable (see the previous step).
Press
to invert the selected bit and press
The parameter or bit is now selected as the parameter value.
Editing bit-field parameters
■
A bit-field parameter is a bit word whose individual bits can be edited. The labels describe
the function of each bit, and the current state of the bit is shown as 1 or 0.
•
Use
and
to select a bit.
•
To change a bit value, press
•
To save the bit values and exit, press
•
To cancel and exit, press
(Save) instead.
or .
(Save).
(Cancel).
Functions in the main Menu 39
(Save) to save the selection.