Front Panel Layout And Led Indicators - ABB Eurofire EN54 User And Engineers Instructions

Eurofire Front Panel Layout
INDICATOR DETAILS
GENERAL FIRE - Illuminates when the panel has detected a fire activation or the Evacuate button has
GENERAL FAULT - Illuminates if a fault has been detected.
SUPPLY HEALTHY - Is Illuminated whilst power is being supplied to the control panel.
SUPPLY FAULT - Is made to flash if there is a fault with either the power supply or standby battery system.
DELAY ENABLED - Illuminates while there is a delay to the external sounders operating.
ALARM SILENCED - Illuminates when the external sounders have been silenced.
TEST - Illuminates when the panel is in Walk Test mode.
ALARM FAULT/ - Is made to flash if a fault on the alarm/sounder circuit has been detected.
DISABLED
DISABLED - Illuminates when there is a disablement on the system – this can be a Fire Zone
SYSTEM FAULT - Illuminates if the panel has 'crashed' for any reason and has been restarted
ZONES IN FIRE - Illuminates in fire conditions to provide indication of the zone(s) that are activated. In the
(1-16)
ZONES IN FAULT - Flashes to indicate a fault with a specific zone.
(1-16)
been pressed.
It is illuminated when alarm(s) are disabled – the 'DISABLED' LED is also illuminated.
or an alarm line. When the DISABLED LED is illuminated, the specific 'zone
fault' or 'alarm fault' LED is also illuminated to show where the disablement is.
by the internal watchdog circuit or if the system software has become corrupted.
'TEST' condition the specific fire led will illuminate when the zone has been tested.
Illuminated when zones are 'DISABLED' or in 'TEST' – are used with the general
condition indicators above.
3