Display - ABB ACS-AP-I User Manual

Display

￭
In most views, the following control panel elements are shown on the display:
1
7
1 Control location and
related icons
2 Panel bus
3 Status icon
2
Indicates how the drive is controlled:
No text: The drive is in local control, but controlled from another device. The icons
in the top pane indicate which actions are allowed.
Local: The drive is in local control, that is, controlled from the control panel.
Remote: The drive is in remote control, that is, controlled through I/O or fieldbus.
Indicates that there are more than one drive connected to this panel.To switch to
another drive, go to Options → Select drive.
Indicates the status of the drive and the motor. The direction of the arrow indicates
forward (clockwise) or reverse (counter-clockwise) active reference direction.
Note: For non-rotating driven equipment, the numbers 1 and 0 are used to indicate
that the drive is running or stopped, respectively.
Status Animation
icon
-
-
Blinking
Blinking
Blinking
Rotating
Rotating
4
3
8
Drive status
Stopped
Stopped, start inhibited
Stopped, start command given but start inhibited
Faulted
Running, at reference, but the reference value is 0
Running, not at reference
Running, at reference
Control panel overview 19
5
6
7