Auto; Loc/Rem; Key Shortcuts - ABB ACS-AP-I User Manual

22 Control panel overview

Auto

The Auto key ( ) is used to run the drive automatically. The control is selected from
primary or secondary or any DI. You can give the reference inputs in Menu → Primary
settings → Drive or by setting the values in parameter groups 19 and 20.

Loc/Rem

The location key ( Loc/Rem
remote connections (Remote). When switching from Remote to Local while the drive is
running, the drive keeps running at the same speed. When switching from Local to Remote,
the status of the remote location is adopted. See the drive-specific firmware manual for
more details.

Key shortcuts

The table below lists key shortcuts and combinations. Simultaneous key presses are indicated
by the plus sign (+).
Shortcut Available in...
any view
+ +
any view
+
+
any view
+
+
Home view
or
parameter edit views
+
any view
+
any view
(keep down)
) is used to switch the control between the control panel (Local) and
Effect
Save a screenshot. Up to fifteen images can be stored in the
control panel memory. For instructions on how to transfer the im-
ages into a PC, see section
panel and a PC (page
Adjust backlight brightness.
Adjust display contrast.
Adjust reference.
Revert an editable parameter to its default value.
Show/hide parameter index and parameter group numbers.
Return to Home view by pressing down the key until Home view
is shown.
Transferring files between the control
73).