Changing The Room Temperature Of A Zone; Definition Of Zone; Changing The Name And Symbol Of A Zone - REMEHA Quinta Ace 30 Installation And User Manual

Tab.54 Extended menu to configure a heating circuit Zone configuration
Menu
Short temperature change
OperatingZoneMode
Manu ZoneRoomTempSet
Holiday Mode
Zone friendly Name
Icon display zone
11.6

Changing the room temperature of a zone

11.6.1

Definition of zone

Fig.72 Two zones
11.6.2

Changing the name and symbol of a zone

7684359 - v.11 - 13122021
Function
Change the room temperature temporarily, if required.
Select the heating operating mode: Scheduling, Manual.
Set the room temperature manually to a fixed setting.
Set the start and end date of your holiday and the reduced temperature for
this zone.
Create or change the name of the heating circuit.
Select the icon of the heating circuit.
Zone is the term given to the different hydraulic circuits CIRCA, CIRCB
and so on. It designates several areas of a building served by the same
circuit.
Tab.55 Example of two zones
Zone
1 Zone 1
2 Zone 2
2
1
AD-3001404-01
The zones have a factory set symbol and name. Depending on your
appliance you can change the symbol and name for the zones, not all
appliances and zone types will support changing the symbol and name.
Select zone > Zone configuration > Zone friendly Name or Icon
display zone
Installer access enabled: Select zone > Zone friendly Name or
Icon display zone
Use the rotary knob to navigate.
Use the
1. Select the tile of the zone you want to change.
2. Select Zone configuration
This menu will not appear if you have installer access enabled,
continue to the next step.
3. Select Zone friendly Name
A keyboard with letters, numbers and symbols (characters) is
shown.
4. Change the name of the zone (20 characters maximum):
Factory name
CIRCA
CIRCB
button to confirm your selection.
11 User instructions
67