Searching The Parameters, Counters And Signals; List Of Parameters; Cu-Gh08 Control Unit Parameters - REMEHA Quinta Ace 30 Installation And User Manual

8 Settings
Fig.53 Second letter
Fig.54 Number
8.2

Searching the parameters, counters and signals

Fig.55 Search
........ ....... ........ ......... ...
00:12
..... ... ....... .... .. ..... ....... .... ..... .......
i
........ .......
* * * *
A C 0 0
B M 1 1
C P 2 2
D 3 3
E 4 4
Fig.56 List of datapoints
........ ....... ........ ......... ...
00:12
..... ... ....... .... .. ..... ....... .... ..... .......
i
........ .......
AC001 ...... ... ....... ....... .... ...
AC002 ...... .......... .......
AM001 .............. ...
AM002 ...... ... .
AP001 ........ .. ....... .... ...
..... ... ....... .... .. ..... ....... .... ..... .......
8.3

List of parameters

8.3.1

CU-GH08 control unit parameters

Tab.42 Navigation for basic installer level
Level Menu path
Basic installer
General
(1) See the column "Submenu" in the following table for the correct navigation. The parameters are grouped in specific functionalities.
44
CP010
AD-3001376-01
CP010
AD-3001377-01
*
0
1
2
3
4
AD-3001916-01
....... ...
.......
.... ...
...... ..
AC001
AD-3001917-01
> Installation Setup > CU-GH08 > Submenu
The second letter is the type.
P Parameter: Parameters
C Counter: Counters
M Measurement: Signals
The number is always three digits. In certain cases, the last of the three
digits relates to a zone.
You can search and change data points (Parameters, counters, signals) of
the appliance, connected control boards and sensors.
> Installation Setup > Search datapoints
Use the rotary knob to navigate.
Use the button to confirm your selection.
1. Press the button.
2. Select Installation Setup.
3. Select Search datapoints.
4. Select the search criteria (code):
4.1. Select the first letter (datapoint category).
4.2. Select the second letter (datapoint type).
4.3. Select the first number.
4.4. Select the second number.
4.5. Select the third number.
The * symbol can be used to indicate any character within the
search field.
The list of datapoints appears in the display. Only the first 30 results
are shown when searching.
5. Select the desired datapoint.
All tables show the factory setting for the parameters.
Important
The tables also list parameters that are only applicable if the boiler
is combined with other equipment.
> Parameters, counters, signals > Parameters >
(1)
7684359 - v.11 - 13122021