Summary of Contents for fantastic furniture MILFORD
Page 1
MILFORD PAN TRY 2 DOOR fantasticfurniture.com.au...
Page 2
fixing device to use. Weight Limit: 20kgs per shelf Love it? Share it! Fantastic buy! Share how it looks at home on Instagram for your chance to win a $250 Fantastic Furniture Gift Card! @fantasti cfurni ture fantasticfurniture.com.au Page2...
Assembly Checklist Read through the instructions Make sure you have all the required tools. Never use power tools unless instructed. carefully before you begin. Unless instructed, do not fully tighten Identify and lay out all of the components before you begin assembly. screw s until the item is fully assembled.
What You Need Right Side Panel (P2) Support Panel Top Panel to assemble the product (P3) (P5) Back Panel (P6) j ustable Shelf (P7) Other tools you need Phillips head screwdriver Hammer. F ixed Shelf (P10) Le t Side Panel (P1); Right Side Panel (P2);...
Page 5
Step 1 (H5) (H5) You will need (H5) (H4) (H5) (H4) 12 x Screws 6 x Hinges (H5) (H5) (H4) (H5) (H4) (H8) (H8) 2 x Handles 4 x Screws (H5) (H5) (H7) (H8) (H4) (H7) Phillips head screwdriver (P9) x 2 Attach 3 x Hinges (H4) to oor (P9 ) as shown with 6 x crews (H5 ) by tightening with the Phillips Head...
Page 6
Step 3 You will need 1 x Cam Bolt Phillips head screwdriver (H2) (H2) (P3) (H2) Attach Cam Bolt (H2) to Top Panel (P3) by tightening with the Phillips Head Screwdriver. Step 4 You will need (H3) (H3) 4 x Dowels (H3) (P10) (H3)
Page 7
E nsure the raw edges of side & shelf panels are at the back of the unit and cam Step 5 nuts are on the underside of the shelf before securing You will need (H2) (H2) (H1) (H1) (H1) x Cam Nuts Phillips head (P5) (H1)
Page 8
Step 7 You will need 4 x Screws 1 x A llen K ey (H15) (H16) (P8) (H15) (P8) (P4 ) (P8) (H15) (H15) (P8) (H16 ) (H15) (P8) (H16 ) (H15) Attach Feet (P8x4) to Bottom Panel (P4) with 4 x Screws (H15) by tightening with the Allen Key (H16).
Page 9
Step 9 You will need 40 x Nails 6 x Screws (H17) (H17) (H17) (H17) (H17) (H17) Phillips head Hammer screwdriver Align the Back Panel (P6) with the edges of the partially assembled unit and the pre-drilled holes with the back of the fixed shelf.Attach Back Panel (P6) to the back of Fixed Shelf (P5) with 6 x Screws (H17) by tightening with the Phillips Head Screwdriver.Attach Back Panel (P6) to Left,Right,Top&Bottom Panels (P1,P2,P3&P4) with 40 x Nails (H9) with the Hammer.Ensure the nails are evenly spaced out as shown an are placed approximately 5mm from the edge of...
Page 10
Step 11 You will need 12 x Screws Phillips head screwdriver (H5) (H5) (H4) (H4) (P2) (H5) (P1) (P9) (P9) With assistance carefully align the 3 x Hinges (H4) on the Door (P9) to Right Side Panel (P2) and secure with 6 x Screws (H5) by tightening with the Phillips Head Screwdriver. Repeat steps for the second Door (P9).
Page 11
Step 13 (H11) (P3) You will need (H13) (H10) 1 x Wall Strap Screw 1 x Wall Strap (H11) (H10) 1 x Washer Phillips head (H13) Screwdriver Attach Wall Strap (H10) to Top Panel (P3) with 1 x Washer (H13) and 1 x Wall Strap Screw Step 14 ( H10) ( H13)