Advertisement
Quick Links
Advertisement
Related Manuals for fantastic furniture BUSSY BUNK BED MK 2
Summary of Contents for fantastic furniture BUSSY BUNK BED MK 2
- Page 1 Version 1.1 BUSSY BUNK BED MK 2 www.fantasticfurniture.com.au...
- Page 2 HELPFUL BUNK BED SAFETY TIPS Bunk beds should be checked periodically to ensure that the guardrail,ladder and other components are secure and in the correct position and all connectors are tight. We recommend that children under the age of nine (9) do not use the upper bunk. Children should be discouraged from playing on the bunk bed.
- Page 3 Assembly checklist Read through the instructions carefully through the instructions care Make sure you have all the required tools. sure you have all the required before you begin. Never use power tools unless instructed. use power tools unless instr Unless instructed, do not fully tighten screws t d d t f ll ti ht Identify and lay out all of the components...
- Page 4 What you need to assemble the product DO NOT USE P36 P36 Other tools you need Flat head screwdriver Phillips head screwdriver View Outside P29x 13 P39 x 4 P13 x 4 P4 x 4 P1 x 4 Parts list Box 1:P2,P3,P4,P5,P7,P8,P9,P18,P27,P38,P39,P40,P41,P42 Box 2:P10,P32,P34,P36,P37 Box 3:P1,P12,P13,P14,P15,P16,P17,P19,P22,P23,P24,P25,P26,P28,P29,P33,P35...
- Page 5 Step 1 - Unpack cartons,Identify and layout each item below. ITEM CARTON ITEM CARTON SHAPE SHAPE www.fantasticfurniture.com.au PAGE 5...
- Page 6 Step 2 - Lay Panels (P2)+(P3) flat as shown. www.fantasticfurniture.com.au PAGE 6...
- Page 7 Step 3 You will need: 12 x Medium Dowels 20 x Large Screws Ø4 x 25 mm Ø8 x 20 mm (H8) (H10) Phillips head screwdriver - Insert 12 x Medium Dowels (H8) into Panels (P2)&(P3). - Attach and fix Panels (P4)&(P5) to Panels (P2)&(P3) using 20 x Large Screws (H10) as shown. www.fantasticfurniture.com.au PAGE 7...
- Page 8 Step 4 You will need: 4 x Cam Bolts 20 x Large Dowels Ø5 x 45 mm Ø8 x 30 mm (H1) (H7) Phillips head screwdriver - Screw 4 x Cam Bolts (H1) to Panels (P2) & (P3). - Insert 20 x Large Dowels (H7) into Panels (P2)&(P3). www.fantasticfurniture.com.au PAGE 8...
- Page 9 Step 5 You will need: 4 x Small Bolts 4 x Medium Dowels Ø6 x 20 mm Ø8 x 20 mm (H6) (H8) Phillips head screwdriver - Insert 4 x Medium Dowels (H8) into Panels (P1). - Screw 4 x Small Bolts (H6) to fix Panels (P1) to Panel (P3). Step 6 You will need: 4 x Small Bolts...
- Page 10 Step 7 You will need: 4 x Cam Bolts 4 x Cam Nuts Ø5 x 45 mm Ø14.5 x 11.9 mm (H1) (H2) Phillips head screwdriver This is how a cam nut works..The head of the cam bolt goes into the open mouth of the - Screw 4 x Cam Bolts (H1) to Panels (P8) &...
- Page 11 Step 9 You will need: 2 x Large Bolts 2 x Barrel Nuts Ø6 x 50 mm Ø9.5 x 11 mm (H3) (H4) Flat head Phillips head screwdriver screwdriver -Attach Panel (P6) to Panel (P2). -Insert 2 x Barrel Nuts (H4) into Panel (P6). - Screw 2 x Large Bolts (H3) through Panel (P2) into Barrel Nuts (H4).
- Page 12 Step 11 You will need: 2 x Large Bolts 2 x Barrel Nuts Ø6 x 50 mm Ø9.5 x 11 mm (H3) (H4) Flat head Phillips head screwdriver screwdriver - Attach Panel (P11) to Panel (P2). - Insert 2 x Barrel Nuts (H4) into Panel (P11). - Screw 2 x Large Bolts (H3) through Panel (P2) into Barrel Nuts (H4) - Remark: Adjust position of Barrel Nuts (H4) by Flat head screwdriver if necessary.
- Page 13 Step 13 This is how a cam nut works..You will need: The head of the cam bolt goes into the open mouth of the cam nut. You then turn the cam nut so it 4 x Large Bolts 4 x Barrel Nuts tightens over the bolt.
- Page 14 Step 14 You will need: 4 x Large Bolts 4 x Large Dowels Ø6 x 50 mm Ø8 x 30 mm (H3) (H7) Phillips head screwdriver - Insert 4 x Large Dowels (H7) into Panel (P15). - Attach and fix Panels (P15),(P13) to Panel (P16) using 4 x Large Bolts (H3) as shown.
- Page 15 Step 16 You will need: 4 x Small Screws 2 x Small Dowels Ø4 x 20 mm Ø6 x 30 mm (H11) (H9) Phillips head screwdriver - Insert 2 x Small Dowels (H9) into Panels (P15)&(P16). - Attach and fix Panel (P17) to Panels (P15)&(P16) using 4 x Small Screws (H11) as shown.
- Page 16 Step 18 You will need: 10 x Large Bolts 4 x Large Dowels Ø6 x 50 mm Ø8 x 30 mm (H3) (H7) 10 x Barrel Nuts Phillips head Ø9.5 x 11 mm screwdriver (H4) View Inside - Insert 4 x Large Dowels (H7) into Panels (P11). - Attach and fix Panels (P12)&(P14) to Panels (P2),(P3),(P11).
- Page 17 Step 19 You will need: 2 x Cam Bolts Phillips head Ø5 x 45 mm screwdriver (H1) - Screw 2 x Cam Bolts (H1) to Panel (P18). Step 20 You will need: 2 x Cam Nuts Phillips head Ø14.5 x 11.9 mm screwdriver (H2) This is how a cam nut works..
- Page 18 Step 21 You will need: 10 x Large Screws Phillips head Ø4 x 25 mm screwdriver (H10) - Insert 5 x Panels (P27) into the gaps of Panels (P4) & (P5). - Screw tight with 10 x Large Screws (H10). www.fantasticfurniture.com.au PAGE 18...
- Page 19 Step 22 You will need: 2 x Large Screws Phillips head Ø4 x 25 mm screwdriver (H10) - Insert 2 x Panels (P28) into the gaps of Panels (P27). - Screw tight with 2 x Large Screws (H10) in the middle of the bed . Step 23 You will need: 3 x Large Bolts...
- Page 20 Step 24 You will need: 2 x Large Bolts 2 x Large Dowels Ø6 x 50 mm Ø8 x 30 mm (H3) (H7) 2 x Barrel Nuts Phillips head Ø9.5 x 11 mm screwdriver (H4) Flat head screwdriver - Insert 2 x Large Dowels (H7) into Panel (P20). -Attach Panel (P24) to Panel (P20).
- Page 21 Step 26 You will need: 2 x Large Bolts 2 x Large Dowels Ø6 x 50 mm Ø8 x 30 mm (H3) (H7) 2 x Barrel Nuts Phillips head Ø9.5 x 11 mm screwdriver (H4) Flat head screwdriver - Insert 2 x Large Dowels (H7) into Panel (P21). - Attach Panel (P23) to Panel (P21).
- Page 22 Step 28 You will need: 4 x Large Bolts 4 x Barrel Nuts Ø6 x 50 mm Ø9.5 x 11 mm (H4) (H3) Phillips head Flat head screwdriver screwdriver - Insert 4 x Barrel Nuts (H4) into Panels (P26). - Screw 4 x Large Bolts (H3) through Panels (P22)&(P23) into Barrel Nuts(H4) in Panels (P26). - Remark: Adjust position of Barrel Nuts (H4) by Flat head screwdriver if necessary.
- Page 23 Step 30 You will need: 2 x Large Screws Phillips head Ø4 x 25 mm screwdriver (H10) View Inside - Screw Panel (P21) into Panel (P18) using 2 x Large Screws (H10) from inside out. www.fantasticfurniture.com.au PAGE 23...
- Page 24 Step 31 You will need: 8x Large Dowels Ø8 x 30 mm (H7) - Insert 8 x Large Dowels (H7) into Panels (P4). - Place slats (P29) on top of lower mattress base. www.fantasticfurniture.com.au PAGE 24...
- Page 25 Step 32 - Place the mattress on top of Slats (P29). www.fantasticfurniture.com.au PAGE 25...
- Page 26 Step 33 - Lay Panels (P34)+(P37) flat as shown. www.fantasticfurniture.com.au PAGE 26...
- Page 27 Step 34 You will need: 4 x Cam Bolts 26 x Large Dowels Ø5 x 45 mm Ø8 x 30 mm (H1) (H7) Phillips head screwdriver - Screw 4 x Cam Bolts(H1) to Panels (P34) & (P37). - Insert 26 x Large Dowels (H7) into Panel (P34)&(P37) as shown. www.fantasticfurniture.com.au PAGE 27...
- Page 28 Step 35 You will need: 3 x Large Bolts 2 x Large Dowels Ø6 x 50 mm Ø8 x 30 mm (H3) (H7) 3 x Barrel Nuts Phillips head Ø9.5 x 11 mm screwdriver (H4) Flat head screwdriver - Insert 2 x Large Dowels (H7) into Panel (P32). - Attach Panel (P32) to Panel (P30).
- Page 29 Step 37 This is how a cam nut works..The head of the cam bolt goes into the open mouth of the You will need: cam nut. You then turn the cam nut so it tightens over the bolt. 4 x Cam Bolts 4 x Cam Nuts Ø5 x 45 mm Ø14.5 x 11.9 mm...
- Page 30 Step 39 You will need: 5 x Large Bolts 5 x Barrel Nuts Ø6 x 50 mm Ø9.5 x 11 mm (H4) (H3) Phillips head Flat head screwdriver screwdriver - Attach 5x Panels (P35) to Panel (P34). - Insert 5 x Barrel Nuts (H4) into Panels (P35). - Screw 5 x Large Bolts (H3) through Panel (P34) into Barrel Nuts (H4) in Panels (P35).
- Page 31 Step 41 This is how a cam nut works..The head of the cam You will need: bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt. 2 x Cam Nuts Flat head Ø14.5 x 11.9 mm screwdriver...
- Page 32 Step 42 This is how a cam nut works..The head of the cam You will need: bolt goes into the open mouth of the cam nut. You then turn the cam nut so it tightens over the bolt. 9 x Large Bolts 9 x Barrel Nuts Ø6 x 50 mm Ø9.5 x 11 mm...
- Page 33 Step 43 You will need: 8 x Large Dowels Ø8 x 30 mm (H7) - Insert 8 x Large Dowels (H7) into Panels (P22), (P23), (P24) & (P25). - Place Panels (P34)&(P37) onto Panels (P22) , (P24) , (P23),(P25) . -Remark:Pay attention to same direction of bed head.
- Page 34 Step 44 You will need: 20 x Small Bolts Phillips head Ø6 x 20 mm screwdriver (H6) - Screw Panel (P38 ) onto Panels (P34),(P24) & (P2) with 5 x Small Bolts (H6). - Apply the same method,Screw 1 x Panel (P38) onto Panels (P34),(P22) & (P2), 1 x Panel (P38) onto Panels (P37),(P25) &...
- Page 35 Step 45 You will need: 8 x Large Screws 8 x Medium Dowels Ø4 x 25 mm Ø8 x 20 mm (H10) (H8) Phillips head screwdriver - Insert 2 x Medium Dowels (H8) into Panels (P34)&(P22). - Screw Panel (P39) onto (P34)&(P22) with 2 x Large Screws (H10). - Apply the same method, Screw 1 x Panel (P39) on to Panels (P34)&(P24), 1 x Panel (P39) on to Panels (P37)&(P25),1 x Panel (P39) on to Panels (P37)&(P23).
- Page 36 Step 46 You will need: 12 x Large Dowels Ø8 x 30 mm (H7) - Insert 12 x Large Dowels (H7) into 3 x Panels (P35). - Place 4 x Panels (P36) on Panels (P35). www.fantasticfurniture.com.au PAGE 36...
- Page 37 Step 47 You will need: 2 x Medium Bolts Phillips head Ø6 x 30 mm screwdriver (H5) - Screw the top of Ladder Handrail (P40) on Panel (P37) using 1 x Medium Bolt (H5). - Screw the middle of Ladder Handrail (P40) on Panel (P3) using 1 x Medium Bolt (H5). Step 48 You will need: 2 x Bolts...
- Page 38 Step 49 You will need: 2 x Medium Bolts 2x Bolts Ø6 x 30 mm (H12) (H5) Phillips head screwdriver - Insert 2 x Ladder Step (P41) into Ladder Handrail (P42). - Screw Ladder Step (P41) through Ladder Handrail (P42) using 2 x Bolt (H12) - Remark: Screw by hand &...