Advertisement
Step 9
You will need
40 x Nails
6 x Screws
Phillips head
screwdriver
Align the Back Panel (P6) with the edges of the partially assembled unit and the pre-drilled
holes with the back of the fixed shelf.Attach Back Panel (P6) to the back of Fixed Shelf (P5)
with 6 x Screws (H17) by tightening with the Phillips Head Screwdriver.Attach Back Panel (P6)
to Left,Right,Top&Bottom Panels (P1,P2,P3&P4) with 40 x Nails (H9) with the Hammer.Ensure
the nails are evenly spaced out as shown an are placed approximately 5mm from the edge of
the back panel.
Step 10
You will need
12 x Shelf Supports
(H6)
Insert 12 x Shelf Supports (H6) into Left & Right Side Panels (P1&P2) as shown at
your desired height. Place Ad ustable Shelves (P7x3) into the unit and rest on
shelf supports. Ensure the shelves are firmly secured.
fantasticfurniture.com.au
(H17)
Hammer
j
(H17)
(H17)
(H17)
(H6 )
(H6 )
(H6 )
(H6 )
(H6 )
(H6 )
(H6 )
(H6 )
(P2)
(H6 )
(P1)
(H17)
(H17)
(P7)
(P7)
(P7)
(H6)
Page 9
Advertisement
