Assembly checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Identify and lay out all of the components Unless instructed, do not fully tighten screws before you begin assembly. until the item is fully assembled.
What you need to assemble the product Seat (P1) Seat Plate (P2) Gas Lift (P3) Parts list Seat (P1) Decoration Cap (P4) Seat Plate (P2) Gas Lift (P3) Decoration Cap (P4) Star Base (P5) Star Base (P5) 5 x Castors (6) 5 x Castors (6) Hardware pack 4xBolts...
Page 5
Step 1 Insert 5 x castors into the star base (P5) one at a time as shown.Push down firmly on each castor to ensure they are fixed into position. Step 2 Note:Make sure to remove the plastic cap from the top of gas lift. Gas lift (P3) Decpration Cap(P4) Star Base (P5)
Page 6
Step 3 Allen Key Bolt (H2) (H1) Seat Plate(P2) Allen Key 4xBolts (H2) (H1) Seat (P1) Align the holes of the seat plate (P2) to the holes of the underside of the seat (P1). Attach the seat plate (P2) to the underside of the seat (P1) with 4xbolts(H1) using an allen key (H2).