Advertisement
Step 5
You will need
6
x Cam Nuts
Phillips head
(H1)
screwdriver
Insert 4 x Cam Nuts (H1) into Fixed Shelf (P10) Insert 2 x Cam Nuts (H1) into Support
Panel (P5).Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Left & Right Side Panels (P1&P2) to Fixed Shelf (P10) and Support Panel (P5) by
tightening the cam nuts with the Phillips Head Screwdriver.
Step 6
You will need
8 x Screws
Phillips head
(H14)
screwdriver
1 x Cam Nut
(H1)
Insert 1 x Cam Nut (H1) into Support Panel (P5) and rotate the cam
nut so the arrow
points towards the incoming cam bolt. Secure Top Panel (P3) to
Support Panel (P5) by
Attach Top & Bottom Panels
Screws (H14) as shown by tightening with the Phillips Head Screwdriver.
E nsure the raw edges of side & shelf
panels are at the back of the unit and cam
nuts are on the underside of the shelf
before securing
(H1)
(H2)
(H14)
(P3)
(H1)
(H14)
tightening the cam nut with the Phillips Head Screwdriver.
(P3&P4) to Left & Right Side Panels (P1&P2) with 8 x
(H1)
(P5)
(P10)
(H1)
(P2)
.
E nsure the raw edges of top & bottom
panels are at the back of the unit
before securing
(H14)
(P5)
(P2)
(H2)
(H2)
(H1)
(H1)
(P1)
(P1)
(P4)
(H14)
(H14)
(H1)
(H1)
(H14)
(H14)
Bottom
Page 7
Advertisement
