Assembly checklist Read through the instructions carefully Make sure you have all the required tools. before you begin. Never use power tools unless instructed. Identify and lay out all of the components Unless instructed, do not fully tighten screws before you begin assembly. until the item is fully assembled.
What you need to assemble the product Parts list Box 1: Seat (P1) Seat(P1)X1 Seat plate(P2)x1 Gas Lift(P3)x1 Star Base Cap(P4)x1 Star Base(P5)x1 Seat Plate (P2) Castors(P6)x5 Gas Lift (P3) Star Base Cap (P4) Star Base (P5) 5 x Castors (P6) 4 x Bolts Allen Key (H1)
Page 5
Step 1 (P5) (P6) (P6) (P6) (P6) (P6) Insert 5x castors(P6) into the Star Base (P5) as shown . Push down firmly on each castor to ensure they are fixed in position Note: Make sure to remove the plastic cap from the top of gas lift. (P3) (P4) (P5)
Page 6
You will need (H2) (H1) Allen Key 4 x Bolts (P2) (H2) (H1) (P1) Align the holes on the Seat Plate (P2) with the bottom of the Seat(P1) and use the Allen Key(H2) to fasten 4x Bolts (H1) to the Seat (P1). Ensure the front of the Seat Plate(P2) is in the correct direction before securing to the base of the Seat(P1).