FUEL SYSTEM
THROTTLE BODY INSTALLATION
1. Prior to installing the throttle body, verify the throttle
body adapter plate gear clamps
shown.
2. Reinstall the throttle cable. Tighten throttle cable lock
2*
nut
to specification.
NOTICE
Turn the throttle cable in-line adjuster to full length
(clockwise) prior to cable installation.
TORQUE
Throttle Cable Lock Nut:
44 in-lbs (5 N·m)
5.14
2(
are positioned as
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
3. Reinstall the throttle body into the reed valve /
manifold assembly. Tighten gear clamps
specification.
TORQUE
Throttle Body Gear Clamps:
11 in-lbs (1.24 N·m)
4. Properly route TPS harness and secure the harness
2^
with new cable ties
retainer mounted on the engine.
NOTICE
For additional routing information, see TPS Wire
Routing page
2&
to
to the wire support and wire
.
© Copyright Polaris Inc.