Polaris 850 MATRYX INDY XC 129 2021 Manual page 190

ENGINE / COOLING / EXHAUST
36. Disconnect the water temp sensor
3%
from the wiring harness.
NOTICE
Remove any cable ties but note locations for
installation.
37. Remove the stator connector
harness.
3.36
3$
and DET sensor
3^
from the wiring
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
38. Remove the cable ties
NOTICE
Do not remove the cable tie securing the support to the
coolant hose.
39. Remove the fuel injector harness
3(
connector from the wiring harness. Remove the
connectors from the connector placement bracket.
NOTICE
Do not attempt to disconnect the fuel injectors from the
sub harness.
3&
from the wire supports.
3*
and oil pump
© Copyright Polaris Inc.