FUEL SYSTEM
6. Remove the push rivets
the intake plenum.
7. Remove the cable tie
tube to the chassis.
8. Remove the diagnostic connector
9. Remove the fastener
tube.
5.10
y
retaining the intake tube to
y
securing the upper intake
u
from the cap.
i
retaining the lower intake
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
10. Carefully remove the intake tube assembly
11. Disconnect the ECU connectors
harness.
12. Remove the edge clip
to the intake plenum.
o
.
a
form the wiring
s
retaining the wiring harness
© Copyright Polaris Inc.