23. Carefully install the air box
snowmobile.
2(
24. Torque gear clamps
to specification.
TORQUE
Air Box to Throttle Body Gear Clamps:
11 in-lbs (1.24 N·m)
NOTICE
If the ignition coils were removed, reinstall the ignition
coils and torque fasteners to specification.
TORQUE
Air Box Coil Fasteners:
36 in-lbs (4 N·m)
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
3)
back into the
ENGINE / COOLING / EXHAUST
25. Install new cable tie on air box routing clip
secure the stator wiring harness and throttle cable.
26. Connect the T-MAP Sensor
2^
and install new cable tie
27. Install the PBR and fasteners
specification.
TORQUE
PBR Fasteners:
6 ft-lbs (8 N·m)
2*
to
2&
to the wiring harness
to secure wiring.
2%
. Torque fasteners to
3.43
3