Table of Contents
Advertisement
WIRELESS SETUP
There are many factors that can affect and/or interrupt a wireless signal, including walls, glass,
metal, objects, and people. Therefore, the following guidelines are recommended in order to maxi-
mize the chances of having a clear path for the wireless signal to reach the device:
•
Install the device a minimum of 9.8 ft (3m) above audiences and/or ground level.
•
Arrange the wireless antenna in an upright, vertical position.
•
Position devices in direct line of sight of the transmitting controller.
Careful planning and testing of the selected installation location is critical to ensure optimum and
reliable wireless operation.
UC IR REMOTE
The unit should respond to commands issued from the UC IR Remote. NOTE: The unit can only
be controlled when it has been set to Master mode. The unit will NOT respond to commands
when it has been set to Slave mode.
UC IR/AIRSTREAM CONTROL
19
Advertisement
Table of Contents
