Uc Ir Remote Control & Setup - ADJ H2O IR User Manual

UC IR SETUP
There are many factors that can affect and/or interrupt a wireless signal, including walls, glass, metal,
objects, and people. Therefore, the following guidelines are recommended in order to maximize the
chances of having a clear path for the wireless signal to reach the device:
• Install the device a minimum of 9.8 ft (3m) above audiences and/or ground level.
• Arrange the wireless antenna in an upright, vertical position.
• Position devices in direct line of sight of the transmitting controller.
Careful planning and testing of the selected installation location is critical to ensure optimum and
reliable wireless operation.
The UC IR infrared remote gives you control of various function (see below).
To control the fixture you must aim the remote at the front of the fixture and
be no more than 30 feet away, with a clear line of sight.
STAND BY - Pressing this button will blackout the fixture.
FULL ON - No function
FADE/GOBO - No function
"DIMMER + and DIMMER -" - These buttons adjust the output intensity
STROBE - No function
COLOR - Press this button to rotate or stop the color wheel
1-9 - No function
SOUND ON & OFF - No function
SHOW 0 - No function
UC IR CONTROL & SETUP
UC IR CONTROL
9