Uc Ir Control And Airstream Control - ADJ COB CANNON WASH ST DW User Manual

R E M O T E O P E R A T I N G I N S T R U C T I O N S
Airstream IR (sold separately): The remote transmitter plugs into the headphone jack of your iOS
phone or tablet. To control your IR fixture, you must raise the volume to the maximum on your iOS
phone or tablet and aim the transmitter at the fixture sensor and be no more than 15 feet away.
After you have purchased the Airstream IR transmitter, the app is a free download from the app
store for your iOS phone or tablet. The app comes with 3 pages of control depending on the fixture
you are using. Please see below for the IR Functions in the corresponding app page.
Works with App Page 1.
UC IR Remote: The UC IR Remote can only be used if "IR Remote Function" is set to "On" (see
page 17 for instructions on enabling IR Remote Function).
• STAND BY - Pressing this button will blackout the fixture. Press
the button again to return to the initial state.
• FULL ON: Press this button to fully light up the unit.
• FADE/GOBO: Press this button to switch between Color Fade,
Color Change and Auto Run mode.
• DIMMER + and DIMMER -: Use the buttons to adjust the color
output intensity when color mode is active.
• STROBE: Press this button for strobing, then press button '1' to
select slow strobe speed, button '2' to select medium strobe
speed, button '3' to select fast strobe speed, button '4' to select
faster strobe speed.
• COLOR: Press this button to activate color mode. Use buttons 1-9
to select your desired color.
• 1-9 BUTTONS: Use buttons 1-4 to select your desired strobe
speed when strobe mode is active. Use buttons 1-9 to select your
desired color when color mode is active or your desired show
when show mode is active.
• SOUND ON and SOUND OFF: Use the buttons to activate and deactivate sound active mode.
• SHOW 0: Press this button to select Show mode. Then use buttons 1-9 to select Shows 1-9.
Press the "Show 0" button twice to run Show #10, and press button '1' twice to run show #11.
21