Uc Ir/Airstream Control - ADJ Startec Series User Manual

UC IR/AIRSTREAM CONTROL

The UC IR infrared remote (sold separately) allows the user to control various functions, as described
below. To control the fixture, the remote must be aimed at the front of the fixture. Maximum range is
30 feet.
The Stinger II comes with the Airstream IR remote transmitter. The ADJ Airstream IR is a universal
infrared remote control App that is used to control a variety of UC IR compatiable fixtures. You can
download the Airstream IR App in the iOS App store. The remote transmitter plugs into the head-
phone jack of your iOS phone or tablet. The App comes with 3 pages of control depending on the IR
fixture you are using. Additional Airstream IR transmitters are available for purchase please contact
your ADJ dealer.
Works with App page 1.
STAND BY - Pressing this button will blackout the fixture. Press the button again to return to the ini-
tial state.
FULL ON - Hold this button down to fully illuminate the unit. When the button is released, the unit
will return to its previous state.
STROBE - Press and hold this button for strobing. (Strobing works for software version 1.3 and
newer).
FADE/GOBO - This button has no active function for this unit.
"DIMMER +" and "DIMMER -" - These buttons have no active function for this unit.
COLOR - Press this button to activate color mode. Use buttons 1-9 to select your desired color.
1-9 - Use buttons 1-9 to select your desired color when color mode is active.
SOUND ON & OFF - Use these buttons to activate and deactivate sound active mode.
SHOW 0 - Press this button to activate show mode. Use buttons 1-6 to select your desired show.
20