Table of Contents
Advertisement
Note:
Using a seat cushion on the seat system is
mandatory. At cold temperatures, the seat
cushion prevents lower abdomens from under-
cooling and protects against dirt and wetness.
Moreover, the cushion ensures uniform pres-
sure distribution for your bottom and absorbs
impacts as well as vibrations.
20 Clothing guard
20.1 Side panel with integrated cloth-
ing guard
In the version of the product with a "side panel
with integrated clothing guard", the side panel
and the clothing guard consist of a single piece
that is bolted onto the backrest and product
frame. There is no possibility to remove the
clothing guard and no possibility to adjust the
clothing guard from its position to the drive
wheel.
Figure 34: Side panel with integrated clothing guard
(shown without the drive wheel)
20.2 Side panel with bolt-on clothing
guard
20.2.1 Overview of terms
If the product is fitted with a "side panel with
bolt-on clothing guard" the clothing guard is
fitted on each side with two M5 fixing screws
(AF 3 mm) with washers and two clothing
guard brackets are screwed onto the side pan-
el.
21
Usage instructions SPEEDY F4 and F2
Rear M5 fixing screw with washer
Front M5 fixing screw with washer
Figure 35: Side panel with bolt-on clothing guard
and M5 fixing screws (shown without the drive
wheel)
Clothing guard mount
Figure 36: Clothing guard mount
20.2.2 Removal and attachment of the
clothing guard
The following instructions are intended
for and may only be carried out by a rehabilita-
tion specialist dealer or PRO ACTIV
The clothing guard can be removed on each
side by loosening the two M5 fixing screws (AF
3 mm) with the washers and removing the two
clothing-guard brackets.
Advertisement
Table of Contents
