Table of Contents
Advertisement
Quick release lever
Figure 174: Closed quick release lever
To remove the push handle, the M4 end stop
screw (AF 3 mm) needs to be unscrewed and
the quick release lever needs to be opened.
M4 End stop screw
Figure 175: End stop screws mounted at the bottom
of the push handles offset to the back
To attach them, the push handles are inserted
and held at the correct height, and the quick
release levers are closed. Finally, the M4 end
stop screws (AF 3 mm) are screwed in again.
If necessary the tension can be adjusted
by turning the quick release lever clockwise
until it reaches the end stop.
Each time prior to use, the M4 end stop
screws (AF 3 mm) must have been mounted
again.
59
Usage instructions SPEEDY F4 and F2
26.6 Safety instructions
After every adjustment or after reattach-
ment following removal, check that the push
handles are firmly attached in position.
Due to environmental effects, it is possi-
Open
ble that the properties and therefore secure
attachment of the push handle covers may
change detrimentally. For this reason, it is
important to check that the handles are tightly
fitted and fixed in position prior to use. If this
should no longer be the case, then the push
handles may not be used until they have been
fixed
.
27 Passenger transport in motor
vehicles
27.1 Standard specifications
In order to approve the product as a seat for
passenger transport in motor vehicles, verifica-
tion of the dynamic crash stability according to
ISO 7176-19 (wheelchairs for use in motor
vehicles) is required.
Furthermore, the additional retention system is
required for the safe transport of the person
sitting in the product in a motor vehicle, that
complies with the requirements according to
DIN 75078-2 (Motor vehicle for the transporta-
tion of handicapped persons – Part 2: Restraint
systems; concepts, requirements, testing) and
ISO 10542-2 (Technical systems and aids for
disabled or handicapped persons. Wheelchair
tiedown and occupant-restraint systems).
PRO ACTIV offers passenger and wheelchair
restraint systems with new orders, but also for
retrofitting. In the following, we shall inform you
about the use and application of this retention
system when using the product as a seat in a
motor vehicle.
Advertisement
Table of Contents
