Data Transmission Via Cellular 4G (Fex45X) - ABB AquaMaster4 Operating Instruction

A Q U A M A S T E R 4 | E L E C T R O M A G N E T I C F LO W M E T E R T R A N S M I T T E R | O I/ F E T4 0 0 - E N R E V. D

Data transmission via cellular 4G (FEX45X)

Additional transmitter configuration is required before normal
operation.
Note:
Below are the additional configurations to be done for normal
operation along with those as per Establish cellular 4G
communication on page 38.
1 Enable Advanced Access Level Enable in User Access Right
Settings and navigate to Advanced Settings – Cellular 4G >
Operation mode.
2 Click the edit icon and select Disabled and tap the phone/
tablet to the device to disable Cellular 4G communication.
3 Configure the below parameters for FTPS server through
Velox interface app under Advance Settings – Cellular 4G
and tap the phone/tablet to the device to update the
parameters.
Item
Data report time base
Data report interval
Data report mode
Alarm report on raise condition
Alarm report on clear condition
4 In case of Detail report, Logging interval & Retrieved record
interval needs to configure under Process Logger Settings.
5 Transmitter supports optional SIM card configurations in
Advance Settings – Cellular 4G.
• SIM card pin: The transmitter supports to set PIN for un-
authorized access by setting the PIN in Advance Settings –
Cellular 4G > SIM card pin .
• Lock SIM card: Select On in Advance Settings – Cellular 4G
> Lock SIM card to lock the SIM card with the PIN as per
above.
• Unlock SIM Card: Select On in Advance Settings – Cellular
4G > Unlock SIM card to unlock the SIM card with the PIN as
per above.
• SIM card PUK: If the PIN is lost, the transmitter allow
customer to enter PUK (Personal Unblocking Key) for the
SIM card with the reset PIN code under Advance Settings –
Cellular 4G > SIM card puk.
6 Navigate to Advanced Settings – Cellular 4G > Operation
mode.
7 Click the edit icon and select Enabled and hover the phone/
tablet to the transmitter to enable Cellular 4G
communication.
Description
e.g. 0 (to set the base time for
sending report at 00:00 h), the
value should be in seconds.
1 hour / 6 hour / 12 hour / 1 day
Detail report / summary report
Off / On
Off / On
8 Reboot the transmitter through Velox by selecting On in
Firmware Information > Reboot system and hover the
phone/tablet to device and the transmitter is now ready for
normal operation.
Note:
Renewal for SSL/TLS keys and certificates is easy and similar to
the steps as per page 38. Every time when a new signed CSR file
is exported, the internal 4G private key will be renewed meaning
the previous internal 4G private key is erased and cannot be
used. The renewed and signed device public-key certificate
should be imported into the device to make sure that the
interval 4G private key and the device public-key certificate are
used in pair. Similarly, importing the trust anchor will renew the
trust anchor with the previous one.
45