Pressure Transducer (Optional); Transmitter Protective Cover; Fitting The Transmitter Protective Cover - ABB AquaMaster4 Operating Instruction

A Q U A M A S T E R 4 | E L E C T R O M A G N E T I C F LO W M E T E R T R A N S M I T T E R | O I/ F E T4 0 0 - E N R E V. D
32
...5 Installation

Pressure transducer (optional)

Optional pressure transducers are available for a range of
pressures and cable lengths.
Figure 51 Optional pressure transducer connector (FET432)
Figure 52 Optional pressure transducer connections (FEX45X)
CAUTION – DAMAGE TO EQUIPMENT
• Use only the pressure transducer supplied with the
transmitter – other types may not function.
• ABB pressure transducers require setting of the
transmitter's pressure span and zero factors.
Pressure transducer
connector icon on
transmitter

Transmitter protective cover

An optional protective cover can be fitted over the transmitter
front panel for locations where damage could occur.

Fitting the transmitter protective cover

Referring to Figure 53.
1 Stretch retaining strap
A
transmitter face C .
2 Position optional protective cover
C and clip it into the fitted position
Figure 53 Fitting the transmitter protective cover (FET41X/43X)
(included with cover ) over
B
B over transmitter face
D .