Aquamaster4 Remote Sensor Connections - ABB AquaMaster4 Operating Instruction

A Q U A M A S T E R 4 | E L E C T R O M A G N E T I C F LO W M E T E R T R A N S M I T T E R | O I/ F E T4 0 0 - E N R E V. D

AquaMaster4 remote sensor connections

1 Connect the ground cable
transmitter.
2 Fit the top cover to the transmitter.
3 Remove the cap on sensor connector
B
4 Carefully push sensor plug
until it engages.
IMPORTANT (NOTE)
If the sensor cable is terminated with fly leads,
connection is via a sensor cable adapter box (part
number WABC2035 available separately).
Remote sensor
connector icon on
transmitter top cover
Figure 44 Remote sensor connections (FEW412/432)
C to the top cover of the
.
A
into the socket and rotate
D
A
B
C
D
Figure 45 Remote sensor connections (FEW452)
Remote sensor
connector icon on
transmitter
A
B
D
29